Victron Energy SmartSolar 150/85-MC4 VE.Can MPPT Solar Charge Controller

Exploring the Benefits of Victron Energy SmartSolar 150/85-MC4 VE.Can MPPT Solar Charge Controller

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Features

• MPPT: Ultra fast maximum power point tracking, the MPPT VE.can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model
• The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others
• Control your charger remotely - The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App
• This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data
• Daisy chain additional units -The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply "daisy chained" to each other with a single RJ45 cable between the individual units
• When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device
• Remote monitoring and control - If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s)
• For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520
• SmartSolar control display - The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control
• The remote on/off connector can be externally controlled by a third-party device like a lithium battery, An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device
  

Specifications

• Type: MPPT
• Series/Model: 150/85-MC4 VE.Can
• Battery Voltage: 12/24/48 V Auto Select (36 V Manual)
• Enclosure Rating: IP43 (Electronic Components), IP22 (Connection Area)
• Maximum PV Open Circuit Voltage: 150 V Absolute Maximum Coldest Conditions, 145 V Start-Up and Operating Maximum
• Operating Temperature: -30 to 60°C (Full Rated Output up to 40°C)
• Self-Consumption: <35 mA at 12 V, <20 mA at 48 V
• Humidity: 95%, Non-Condensing
• Power Terminal: Two Pairs of MC4 Connectors
• Temperature Compensation: -16 mV/-32 mV/-64 mV/°C
• Maximum PV Short Circuit Current: 70 A
• Nominal PV Power at 12 V: 1200 W
• Nominal PV Power at 24 V: 2400 W
• Charge Current Rating: 85 A
• Protection: PV Reverse Polarity, Output Short Circuit, Overtemperature
• Absorption Charge: 14.4/28.8/43.2/57.6 V (Adjustable with Rotary Switch, Display, VE.Direct, or Bluetooth)
• Float Charge: 13.8/27.6/41.4/55.2 V (Adjustable with Rotary Switch, Display, VE.Direct, or Bluetooth)
• Peak Efficiency: 98%
• Charging Algorithm: Multi-Stage Adaptive (Eight Pre-Programmed Algorithms) or User-Defined Algorithm
• Data Communication: VE.Can
• Color: Blue (RAL 5012)
• Nominal PV Power at 48 V: 4900 W
• Battery Terminals: 35 mm²/2 AWG
• Nominal PV Power at 36 V: 3600 W
• Data Stored: Battery Voltage, Current, and Temperature, as well as Load Output Current, PV Voltage, and PV Current
• Number of Days Trends Data is Stored: 46
• Charge Voltage Equalization: 16.2/32.4/48.6/64.8 V (Adjustable)
• Maximum Altitude: 5000 m (Full Rated Output up to 2000 m)
• Environmental Condition: Indoor, Unconditioned
• Pollution Degree: PD3
• Remote On/Off: Yes (2-Pole Connector)
• Programmable Relay: DPST AC Rating: 240 VAC/4 A, DPST DC Rating: 4 A up to 35 VDC, 1 A up to 60 VDC
• Parallel Operation: Yes, Parallel Synchronized Operation with VE.Can (Max 25 Units) or Bluetooth (Max 10 Units)
• Dimensions: 246 mm Height x 295 mm Width x 103 mm Depth
• Standards: EN/IEC 62109-1, UL 1741, CSA C22.2
• Weight: 4.5 kg
  

Documents 

• Specification Sheet
• Owners/User Manual
  

Advanced MPPT Technology for Maximum Solar Efficiency

The Victron Energy SmartSolar 150/85-MC4 VE.Can MPPT solar charge controller is designed to optimize solar power harvesting. Utilizing Maximum Power Point Tracking (MPPT) technology, it constantly adjusts the voltage and current to maximize energy extraction from solar panels. This technology increases the system’s overall efficiency by up to 30% compared to traditional controllers, ensuring that every drop of sunlight is converted into usable electricity for your batteries and loads. Its ability to manage higher input voltage allows for flexible panel configurations, improving power generation in varying weather conditions.

Robust and Reliable Build with VE.Can Communication

Built to withstand harsh environments, the Victron Energy SmartSolar 150/85-MC4 features a rugged design with sealed components resistant to dust and moisture. Its compatibility with VE.Can allows seamless integration with other Victron energy devices and system monitoring through advanced communication protocols. This connectivity enables users to monitor charge status, battery health, and energy production remotely via Victron’s VRM portal or through compatible display units. The durable housing and smart connectivity make it ideal for off-grid, marine, or vehicle solar installations where reliability is key.

User-Friendly Features and Flexible Installation Options

Designed with installers and end-users in mind, the Victron Energy SmartSolar 150/85-MC4 VE.Can MPPT controller offers straightforward MC4 plug-and-play connectors for fast, safe installation. Its intelligent firmware supports programmable charging settings and adaptive battery management, ensuring optimal battery lifespan and performance. The controller includes configurable load outputs with low voltage disconnect features, protecting batteries from deep discharge. With its compact form factor and compatibility with various battery types, including lithium and AGM, it suits a wide range of solar applications from homes to industrial setups.