Victron EasySolar-II 48/3000/35-32 MPPT 250/70 GX 230V (SKU Part Number PMP482307010)

Comprehensive Overview of the Victron EasySolar-II

The EasySolar-II GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring.

Features

• The all-in-one solar power solution - The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger, A SmartSolar MPPT -Tr solar charge controller, A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money
• Display and Wi-Fi - The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings
• Solar charge controller - The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT
• GX device - The integrated GX device includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port, A USB port, An ethernet port, A VE.Direct port. The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection
• VRM Portal - Our free remote monitoring website (VRM) will display all your system data in a comprehensive graphical format. System settings can be changed remotely via the portal. Alarms can be received by e-mail
• Grid in-line topology - The EasySolar-II GX will use excess PV power to charge the batteries or to feed power back into the grid and will discharge the battery or use power from the grid to supplement a shortage of PV power. In case of a power outage, the EasySolar-II GX will disconnect the grid and continue to supply the loads. Loads that should shut down when AC input power is not available can be connected to a second output (not shown). These loads will be taken into account by the PowerControl and PowerAssist function in order to limit AC input current to a safe value
• Grid parallel topology - The EasySolar-II GX will use data from the external AC current sensor (must be ordered separately) or power meter to optimize self-consumption and, if required, to prevent grid feed. In case of a power outage, the EasySolar-II GX will continue to supply the critical loads
• Current sensor 100A:50mA - To implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. Maximum current: 50 A resp. 100 A. Length of connection cable: 1 m
• VE.Bus communication port - For parallel and three phase operation, remote monitoring and system integration
  

Specifications

• Dimensions: 490 mm Height x 268 mm Width x 237 mm Depth
• Material: Aluminum
• Color: Blue (RAL 5012)
• Continuous Power at 25 °C: 3000 VA / 2400 W (Inverter)
• Continuous Power at 40 °C: 2200 W (Inverter)
• Peak Power: 5500 W (Inverter)
• DC Input Voltage Range: 38-66 V (Inverter)
• Output AC Voltage: 230 VAC ±2% (Inverter)
• Output AC Frequency (Adjustable): 50 Hz ±1% (Inverter)
• Maximum Efficiency: 95% (Inverter)
• Zero-Load Power: 11 W (Inverter)
• Zero-Load Power in AES Mode: 7 W (Inverter)
• Zero-Load Power in Search Mode: 2 W (Inverter)
• AC Input:
  • Input Voltage Range: 187 - 265 VAC (Charger)
  • Input Frequency: 45 - 66 Hz (Charger)
• Charge Voltage Absorption: 57.6 VDC (Charger)
• Charge Voltage Float: 55.2 VDC (Charger)
• Storage Mode: 52.8 VDC (Charger)
• Maximum Battery Charger Current: 35 A (Charger)
• Battery Temperature Sensor: Yes
• Auxiliary Output: 32 A
• Programmable Relay: Yes
• Protection: A-G, A-G (Smartsolar Charge Controller)
• Remote On/Off: Yes
• Operating Temperature: -40 to 55 °C
• Humidity: Maximum 95% Non-Condensing
• Maximum Altitude: 2000 m
• Enclosure Rating: IP21
• Battery Connection: M8 Bolts
• 230 VAC Connection: Screw Terminals 16 mm²
• PowerControl/PowerAssist: Yes
• Integrated Transfer Switch: Yes
• Cooling Type: Fan Assisted
• Maximum AC Input Current: 32 A
• MPPT Model: MPPT 250/70-Tr (Smartsolar Charge Controller)
• Maximum Output Current: 70 A (Smartsolar Charge Controller)
• Maximum PV Power: 4000 W (Smartsolar Charge Controller)
• Maximum PV Open Circuit Voltage: 250 V (Smartsolar Charge Controller)
• Maximum Efficiency: 99% (Smartsolar Charge Controller)
• Self-Consumption: 20 mA (Smartsolar Charge Controller)
• Charge Voltage Absorption, Default: 57.6 V (Smartsolar Charge Controller)
• Charge Voltage Float, Default: 55.2 V (Smartsolar Charge Controller)
• Interfaces: BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi
• PV Connection: M6 Bolts
• Standards:
  • Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
  • Emission/Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
• Warranty: 5 Years Limited
• Weight: 26 kg
  

Documents 

• Specification Sheet
• User Manual
• Warranty Information

Innovative Integration with Victron EasySolar-II

The Victron EasySolar-II combines a solar inverter, MPPT solar charge controller, and a lithium-compatible battery charger into one compact unit. Designed for off-grid and backup power systems, it offers an integrated solution that simplifies installation and ensures seamless energy management. The model 48/3000/35-32 MPPT 250/70 GX 230V delivers efficient solar charging and power conversion, maximizing energy yields. This integration makes the Victron EasySolar-II an ideal choice for homeowners and professionals seeking reliability and ease of use in solar power setups.

Advanced MPPT Technology for Superior Energy Harvesting

The Victron EasySolar-II features a high-efficiency MPPT (Maximum Power Point Tracking) solar charge controller rated at 250/70, which optimizes the solar array’s performance under varying sunlight conditions. This smart controller continuously tracks the maximum power point to extract the highest amount of energy possible from solar panels. As a result, users benefit from faster battery charging and improved overall system efficiency, ensuring a stable and sustainable power supply in both off-grid and hybrid applications.

Powerful and Reliable Inverter Performance

At the heart of the Victron EasySolar-II lies a 48V 3000VA inverter designed to deliver clean, stable 230V AC power suitable for household and commercial use. The inverter supports a high surge rating, enabling it to handle applications with demanding startup currents. Robust and durable, it offers reliable conversion from DC battery power to AC electricity, ensuring uninterrupted power delivery. This makes it a trusted choice for users requiring dependable solar energy solutions in remote locations or areas with unstable grid power.