Outback Power Comms manager - Four Port, up to 4 devices and one MATE (SKU Part Number HUB4)

Explore the Benefits of the Outback Power Comms Manager

The HUB system communications manager is the backbone of your networked OutBack power conversion system. The OutBack HUB communicates stacking, load share and power save on/off signals. Interconnection cabling is standard Ethernet CAT5 with RJ45 modular jacks. Through the use of a HUB, your system is completely coordinated and managed by the MATE.

Features

• Communication stacking
• Load share and power save on/off signals
• Standard interconnection cabling
• Ethernet CAT5 with RJ45 modular jacks

Specifications

• Width: 8.3 in
• Height: 6.9 in
• Depth: 1.2 in
• Commonly Used Module Pairings: 295-460 W (Input DC)
• Module Compatibility: 60-Cell and 72-Cell PV Modules (Input DC)
• Maximum Input DC Voltage: 58 V (Input DC)
• Maximum Input DC Current: 10.2 A (Input DC)
• Peak Power Tracking Voltage: 38-43 V (Input DC)
• Operating Range: 18-58 V (Input DC)
• Minimum/Maximum Start Voltage: 30 V/58 V (Input DC)
• Maximum DC Short-Circuit Current (Module ISC): 15 A (Input DC)
• Over Voltage Class DC Port: II (Input DC)
• PV Array Configuration: 1 x 1 Ungrounded Array, No Additional DC Side Protection Required, AC Side Protection Requires Maximum 20 A Per Branch Circuit (Input DC)
• Peak Output Power:
  • 366 VA at 240 VAC (Output AC)
  • 295 VA at 208 VAC (Output AC)
• Maximum Continuous Output Power:
  • 349 VA at 240 VAC (Output AC)
  • 290 VA at 208 VAC (Output AC)
• Nominal (L-L) Voltage/Range:
  • 240 V/211-264 V at 240 VAC (Output AC)
  • 208 V/183-229 V at 208 VAC (Output AC)
• Maximum Continuous Output Current:
  • 1.45 A at 240 VAC (Output AC)
  • 1.39 A at 208 VAC (Output AC)
• Nominal Frequency Rating: 60 Hz at 240 VAC (Output AC)
• Extended Frequency Range: 47-68 Hz at 240 VAC (Output AC)
• AC Short-Circuit Fault Current Over 3 Cycles: 5.8 Arms at 240 VAC (Output AC)
• Maximum Units Per 20 A (L-L) Branch Circuit:
  • 11 at 240 VAC
  • 11 at 208 VAC
• Over Voltage Class AC Port: III at 240 VAC (Output AC)
• AC Port Backfeed Current: 18 mA at 240 VAC (Output AC)
• Power Factor Setting: 1 at 240 VAC (Output AC)
• Power Factor (Adjustable): 0.85 Leading to 0.85 Lagging (Output AC)
• CEC Weighted Efficiency:
  • 97% at 240 VAC
  • 96.5% at 208 VAC
• Ambient Temperature Rating: -40 to 60°C
• Relative Humidity: 4-100% (Condensing)
• Connector Type DC (IQ7A-72-2-US): MC4
• Cooling: Natural Convection - No Fans
• Approved For Wet Location: Yes
• Degree of Pollution: PD3
• Enclosure Rating: Class II Double-Insulated, Corrosion Resistant Polymeric Enclosure
• Environmental Category/UV Exposure Rating: NEMA Type 6/Outdoor
• Communication: Power Line Communication (PLC)
• Monitoring:
  • Enlighten Manager and MyEnlighten Monitoring Options Compatible with Enphase IQ Envoy
• Number of Ports: 4 Plus MATE
• Standards:
  • UL Listed
  • CA Rule 21 (UL 1741-SA), UL 62109-1, UL1741/IEEE1547, FCC Part 15 cETLus Listed B, ICES-0003 cETLus Listed B, CAN/CSA-C22.2 NO. 107.1-01
  • UL Listed as PV Rapid Shut Down Equipment and Conforms with NEC-2014 and NEC-2017 section 690.12 and C22.1-2015 Rule 64-218 Rapid Shutdown of PV Systems, for AC and DC Conductors, When Installed According to Manufacturer's Instructions
• Warranty: 25 Years
• Weight: 2.38 lb

Documents 

• Warranty Information

Seamless Device Connectivity with Outback Power Comms Manager

The Outback Power Comms manager provides a reliable solution to connect and manage up to four devices simultaneously, plus one MATE display. This four-port communication hub streamlines the integration of power system components, allowing users to monitor and control their setups with ease. Designed for compatibility and efficiency, the Comms manager ensures all connected devices communicate seamlessly, improving overall system performance and management.

Optimized Power System Management

With the Outback Power Comms manager, maintaining your renewable energy system is more straightforward than ever. By centralizing communication for multiple devices, it reduces complexity and potential errors. This device supports efficient data transfer between controllers, inverters, and MATE displays, ensuring accurate real-time monitoring and control. Its robust build guarantees long-lasting operation, making it a vital component for any Outback power system configuration.

Easy Installation and Reliable Operation

Installation of the Outback Power Comms manager is straightforward, designed with user convenience in mind. The unit’s four available ports and MATE connection simplify wiring and system setup. Its rugged design provides dependable performance in varying environments, securing consistent communication between devices. Whether for residential or commercial power applications, this Comms manager offers reliable operation, enhancing user control and system uptime without complicated setup processes.