Enphase M215 Microinverter

Introducing the Enphase M215 Microinverter

Enphase M215 Microinverters are built on the IQ7 Series platform, allowing for easy replacement and site expansion of 240 VAC solar installations. The DC circuit is isolated and insulated from the ground, so no ground electrode conductor (GEC) is required, simplifying installation, enhancing safety, and saving on costs. The M215 Microinverter integrates perfectly with the Engage Cable, Envoy S, and Enphase Cloud for remote monitoring and control. The IQ Microinverter platform extends the reliability standards set forth by previous generations by completing over a million hours of power-on testing, enabling Enphase to provide an industry-leading limited warranty of up to 25 years. The new Enphase M215™ and M250™ Microinverters on IQ 7™ platform allow easy replacement and site expansion* of 240 VAC M-Series PV installations. The DC circuit is isolated and insulated from ground, so no Ground Electrode Conductor (GEC) is required for the microinverter. This simplifies installation, enhances safety, and saves on labor and materials costs. The Enphase M215 and M250 integrate perfectly with the Engage Cable™, the Envoy™ Communications Gateway, and Enphase Enlighten™ monitoring and analysis software. The IQ platform microinverters extend reliability standards set forth by previous generations and undergo over a million hours of testing, enabling Enphase to provide an industry-leading warranty of up to 25 years.

Features

• Productive - Maximizes energy production. Minimizes impact of shading, dust, and debris. No single point of system failure
• Simple - Lighter weight than earlier M-Series Microinverters. No GEC needed for microinverter. No DC design or string calculation required. Easy installation with Engage Cable
• Reliable - Envoy and Internet connection required. Configurable for varying grid profiles. Built-in rapid shutdown compliant (NEC 2014 & 2017). UL listed
• Lighter weight than earlier M Series Microinverters
• No GEC needed
• No DC design or string calculation required
• Easy installation with engage cables
• IQ Gateway and internet connection required
• Configurable for varying grid profiles
• Built-in rapid shutdown compliant (NEC 2014 and 2017)
• More than a million hours of testing
• UL Listed
• 25-year limited warranty
• Disconnecting means - The AC and DC connectors have been evaluated and approved by UL for use as the load-break disconnect required by NEC 690 and C22.1-2018 Rule 64-220
• Integrated ground - Equipment ground is provided in the Engage Cable. No additional GEC or ground is required. Ground fault protection (GFP) is integrated into the microinverter
  

Specifications

• Dimensions: 212 mm Height x 175 mm Width x 30.2 mm Depth
• Module Compatibility: 60-Cell PV Modules (Input DC)
• Maximum Input DC Voltage: 48 V
• Peak Power Tracking Voltage: 27-45 V
• Operating Range (Input DC): 16 V - 60 V
• Minimum/Maximum Start Voltage (Input DC): 22/48 V
• Maximum DC Short-Circuit Current (Input DC): 15 A
• Peak Output Power: 225 VA
• Maximum Continuous Output Power: 215 VA
• Nominal Voltage (Output AC): 240/211-264 V at 240 VAC, 208/183-229 V at 208 VAC
• Nominal Frequency Rating (Output AC): 60/57-61 Hz
• AC Short-Circuit Fault Current (Output AC): 5.8 A rms
• Power Factor (Adjustable): 0.85 Leading to 0.85 Lagging
• Peak Efficiency: 96.5%
• CEC Weighted Efficiency: 96.5%
• Static MPPT Efficiency: 99.4%
• Ambient Temperature Rating: -40 to 65°C
• Cooling: Natural Convection (No Fans)
• Environmental Rating: NEMA Type 6/Outdoor
• Enclosure Rating: Class II Double-Insulated, Corrosion-Resistant Polymeric Enclosure
• Communication: Power Line Communication (PLC)
• Monitoring: Compatible with Enphase IQ Envoy, Enlighten Manager, & MyEnlighten
• AC Connector Type: Q-ET-2LL
• DC Connector Type: MC4 Locking Type & UTX (Dongle Included)
• Standards: UL Listed (Including NEC-2014 & NEC-2017 Rapid Shutdown Equipment)
• Warranty: 25 Years
• Weight: 2.38 lb

Documents 

• Specification Sheet

What is the Enphase M215 Microinverter?

The Enphase M215 microinverter is a sophisticated device designed to optimize solar power systems, converting direct current (DC) generated by solar panels into alternating current (AC) that can be used in homes and businesses. Unlike traditional inverters that operate on a string system, each M215 microinverter is connected to a single solar panel, allowing for independent operation. This unique feature ensures that shading or performance issues affecting one panel do not compromise the efficiency of the entire system. The Enphase M215 microinverter thus maximizes the energy harvest, helping users generate more power and reduce overall electricity costs.

Key Features of the Enphase M215

One of the standout features of the Enphase M215 microinverter is its robust design, providing a high power output of 215 watts. This device is equipped with advanced technology that includes a built-in monitoring system, allowing users to track the performance of each panel through a user-friendly interface. Additionally, the M215 is lightweight and compact, facilitating easier installation on rooftops. With a 25-year warranty, the Enphase M215 promises durability and reliability, making it an excellent investment for those looking to enhance their solar energy system.

Benefits of Using the Enphase M215 Microinverter

The Enphase M215 offers numerous benefits that contribute to its popularity among solar power users. Firstly, its ability to function independently means greater energy production, especially in environments with varying sunlight conditions. This microinverter also enhances safety by reducing the risk associated with high-voltage DC electricity. Moreover, the M215's compatibility with various solar panels ensures versatility, making it an ideal choice for both residential and commercial setups. With its cost-effectiveness and energy efficiency, the Enphase M215 microinverter is a smart solution for sustainable energy goals.