Victron Energy Solar Charge Controller: Advanced Power Management for Solar Systems

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Features

• MPPT: Ultra fast maximum power point tracking, the MPPT VE.can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model
• The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others
• Control your charger remotely - The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App
• This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data
• Daisy chain additional units -The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply "daisy chained" to each other with a single RJ45 cable between the individual units
• When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device
• Remote monitoring and control - If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s)
• For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520
• SmartSolar control display - The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control
• The remote on/off connector can be externally controlled by a third-party device like a lithium battery, An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device

Specifications

• Type: MPPT
• Series/Model: 150/100-Tr VE.Can
• Battery Voltage: 12/24/48 V Auto Select (36 V Manual)
• Enclosure Rating: IP43 (Electronic Components), IP22 (Connection Area)
• Maximum PV Open Circuit Voltage: 150 V Absolute Maximum Coldest Conditions, 145 V Start-Up and Operating Maximum
• Operating Temperature: -30 to 60°C (Full Rated Output up to 40°C)
• Self-Consumption: <35 mA at 12 V, <20 mA at 48 V
• Humidity: 95%, Non-Condensing
• Power Terminal: 35 mm²/2 AWG
• Temperature Compensation: -16 mV/-32 mV/-64 mV/°C
• Maximum PV Short Circuit Current: 70 A
• Nominal PV Power at 12 V: 1450 W
• Nominal PV Power at 24 V: 2900 W
• Charge Current Rating: 100 A
• Protection: PV Reverse Polarity, Output Short Circuit, Over temperature
• Absorption Charge: 14.4/28.8/43.2/57.6 V (Adjustable with: Rotary Switch, Display, VE.Direct or Bluetooth)
• Float Charge: 13.8/27.6/41.4/55.2 V (Adjustable with: Rotary Switch, Display, VE.Direct or Bluetooth)
• Peak Efficiency: 98%
• Charging Algorithm: Multi-Stage Adaptive (Eight Pre-Programmed Algorithms) or User Defined Algorithm
• Data Communication: VE.Can
• Color: Blue (RAL 5012)
• Nominal PV Power at 48 V: 5800 W
• Battery Terminals: 35 mm²/2 AWG
• Nominal PV Power at 36 V: 4350 W
• Data Stored: Battery Voltage, Current and Temperature, as well as Load Output Current, PV Voltage and PV Current
• Number of Days Trends Data is Stored: 46
• Charge Voltage Equalization: 16.2/32.4/48.6/64.8 V (Adjustable)
• Maximum Altitude: 5000 m (Full Rated Output up to 2000 m)
• Environmental Condition: Indoor, Unconditioned
• Pollution Degree: PD3
• Remote On/Off: Yes (2 Pole Connector)
• Programmable Relay: DPST AC Rating: 240 VAC/4 A, DPST DC Rating: 4 A up to 35 VDC, 1 A up to 60 VDC
• Parallel Operation: Yes, Parallel Synchronized Operation with VE.Can (Max 25 Units) or Bluetooth (Max 10 Units)
• Dimensions: 216 mm Height x 295 mm Width x 103 mm Depth
• Standards: EN/IEC 62109-1, UL 1741, CSA C22.2
• Weight: 4.5 kg
  

Documents 

• Specification Sheet
• Owners/User Manual
  

High-Efficiency MPPT Technology

The Victron Energy Solar Charge Controller incorporates advanced Maximum Power Point Tracking (MPPT) technology, ensuring optimal energy harvest from solar panels. This high-efficiency system maximizes the conversion of solar energy to usable electrical power, reducing losses and improving overall performance. Its intelligent design adapts to changing sunlight conditions in real-time, making it a dependable choice for both small and large solar installations. Such precise power management supports longer battery life and ensures your solar system operates at peak efficiency under diverse weather scenarios.

Seamless VE.Can Communication Interface

This controller features a VE.Can communication interface, allowing integrated connectivity with Victron’s broader range of energy components. This enables easy monitoring and remote control via the Victron Remote Management (VRM) portal or other compatible devices. The communication protocol simplifies system setup and diagnostics, empowering users to optimize their solar setups with detailed reports and real-time data. Such integration leads to enhanced system reliability and offers a future-proof solution for scalable solar arrays.

Robust Build and Flexible Application

Designed for demanding environments, the SmartSolar 150/100-Tr boasts a rugged IP54 rated enclosure and robust electronics that withstand harsh weather and dusty conditions. Its flexible voltage and current specifications make it versatile for various battery chemistries and solar array sizes. From marine to off-grid solar installations, this controller offers reliable power regulation, efficient charging, and built-in protection features against overload and short circuits. Users benefit from both durability and adaptability in their investment.