Understanding the Soladeck Flash PV Roof-Mount

SolaDeck models are flashed, seamless, weather-tight enclosures that are NEMA 3R rated. They provide a flashed roof penetration that connects the outdoor system wiring to the interior house wiring and give consistency in every installation. The 0799-5B Photovoltaic Combiner Enclosure is listed and labeled to UL 1741 standards and can be used to combine or pass-through wiring of both AC and DC circuits. A professional appearance is provided by the 18-gauge galvanized 90 steel and powder-coated finish.

Features

• A slotted cover locks into place with one pre-installed set screw, NO more loose cover screws!
• Lower profile cover allows side and bottom penetration to the sidewalls
• Installed din rail can be used horizontally or vertically depending on your install needs
• Two 3/4 in pre-punched holes at the base of the SolaDeck. Two NEMA 4 plugs come installed, these can be removed to insert your fitting or conduit without needing to drill
• Base and cover stamped from G90 galvanized steel
• 7 in Din rail and 5 position ground block factory installed
• 2/12 - 12/12 Roof slopes
• Limited lifetime warranty
• Seamless draw (stamped) with a 15.75" x 17.25" flashing
  

Specifications

• Type: Roof Mount
• Height: 17-1/4 in
• Width: 15-3/4 in
• Depth: 3.13 in
• Material: 18 Gauge G90 Galvanized Steel
• Finish: Powder Coated Black
• Enclosure Rating/IP Rating: NEMA 4
• Electrical Rating: 600 VDC at 115 A, 240 VAC at 60 A
• Temperature Rating: -35 to 75°C
• Weight: 9.2 lb
• Standards:
  • ETL listed & labeled
  • Conforms to the UL1741 Standard
  • CSA C22.2 No. 290
    

Documents 

• Specification Sheet
• Instruction/Installation Manual
• Drawing Sheet

What is a PV Roof-Mount?

The Soladeck flashed PV roof-mount is a specialized enclosure designed to integrate solar power systems efficiently. It is crucial because it allows safe connection and management of solar array outputs. With a robust design, it ensures durability, providing long-lasting performance even in harsh environmental conditions. Additionally, it supports up to 120 amps at 600VDC, making it suitable for a variety of solar installations.

Benefits of Using the Soladeck Enclosure

This combiner/enclosure not only protects electrical connections from weather and debris but also organizes the wiring from multiple solar panels. Because of its weatherproof features, solar system owners can be assured that their connections remain safe and reliable. Thus, it enhances the efficiency of solar systems, allowing maximum energy harvesting and reducing potential downtime caused by electrical issues.

Installation and Usage

Installing the Soladeck PV roof-mount is designed to be straightforward, and it seamlessly integrates with standard solar installations. Because it features an intuitive mounting system, users can set it up without needing expert help. Moreover, its compact design ensures that it does not take up unnecessary space on the roof, allowing for a clean and aesthetic solar setup. Therefore, combining functionality with convenience, it is an excellent choice for anyone looking to enhance their solar energy system.