Victron Energy

Skylla-i IP21 Battery Charger 24V/80A/230V - (1+1)

$1999.00
$1999.00
Sale

A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air.

Features

  • The right amount of charge for a lead-acid battery: variable absorption time
  • BatterySafe mode - preventing damage due to excessive gassing
  • Storage mode - less maintenance and aging when the battery is not in use
  • Smaller and lighter compared to similar models
  • NMEA 2000 Canbus connection
  • PowerControl - set a maximum shore power
  • Remote Control
  • Li-ion (LiFePo4) ready
  • The Skylla-i (1+1) features 2 isolated outputs. The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery
  • Rugged - Aluminum epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air
  • Circuit boards are protected with an acrylic coating for maximum corrosion resistance
  • Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions
  • Flexible - Next to a CAN bus (NMEA2000) interface, a rotary switch, DIP switches and potentiometers are available to adapt the charge algorithm to a particular battery and its conditions of use
  • Synchronized parallel operation - Several chargers can be synchronized with the CAN bus interface
  • This is achieved by simply - interconnecting the chargers with RJ45 UTP-cables. 

Specifications

  • Input Voltage: 230 VAC
  • Input Voltage Range (VAC): 185-265 V
  • Input Voltage Range (VDC): 180-350 V
  • Maximum AC Input Current at 180 VAC: 16 A
  • Frequency Rating: 45-65 Hz
  • Power Factor: 0.98
  • Charge Voltage Absorption (VDC): 28.8 V
  • Charge Voltage Float (VDC): 27.6 V
  • Charge Voltage Storage (VDC): 26.4 V
  • Charge Current Rating (A): 80 A
  • Charge Current Starter Battery (A): 4 A
  • Charging Algorithm: 7 Stage Adaptive
  • Battery Capacity (Ah): 400-800 Ah
  • Charge Algorithm, Li-Ion: 3 Stage, With On-Off Control or CAN Bus Control
  • Temperature Sensor: Yes
  • Can be Used as Power Supply: Yes
  • Remote On-Off Port: Yes (can be connected to a Li-Ion BMS)
  • VE.Can Communication Port: (2) RJ45 Connectors, NMEA2000 Protocol, Galvanically Isolated, Integrated 12 V CAN-Bus Power Supply, 30 VDC Maximum
  • Synchronized Parallel Operation: Yes, with VE.Can
  • Alarm Relay: DPST AC Rating - 240 VAC/4 A, DC Rating - 4 A up to 35 VDC, 1 A up to 60 VDC
  • Forced Cooling: Yes
  • Protection: Battery Reverse Polarity (Fuse), Output Short Circuit, Over Temperature
  • Operating Temperature: -20 to 60 deg C
  • Humidity: Maximum 95% (Non-Condensing)
  • Material: Aluminum
  • Color: Blue
  • Battery Connection: M8 Bolts
  • 230 VAC Connection: Screw-Clamp 10 mm²
  • Enclosure Rating: IP21
  • Standards:
    • Safety: EN 60335-1, EN 60335-2-29
    • Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2
    • Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
  • Dimensions: 16 in x 9.9 in x 5.9 in
  • Weight: 16 lb

Documents