Victron Smart BatteryProtect 12/24V-220A (SKU Part Number BPR122022000)

The Battery Protect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. When using Bluetooth to program the Smart Battery Protect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual). If required, Bluetooth can be disabled. The Smart Battery Protect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.

Feature Bullets

• Protects the battery against excessive discharge and can be used as a system on/off switch - The Smart Battery Protect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine
• 12/24 V auto ranging - The Smart Battery Protect automatically detects system voltage one time only
• Bluetooth: programming made easy - When using Bluetooth to program the Smart Battery Protect any required engage/disengage levels can be set
• Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual)
• If required, Bluetooth can be disabled
• Instant readout - VictronConnect can display the most important data of the Smart Battery Protect on the Device List page without the need to pair with the product
• This includes visual notifications of warnings, alarms, and errors that enable diagnostics at a glance
• A special setting for Li-ion batteries - In this mode the Battery Protect can be controlled by the VE.Bus BMS
• Ultra-low current consumption - This is important in case of Li-ion batteries, especially after low voltage shutdown
• Over voltage protection - To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16.3 V respectively 32.6 V
• Ignition proof - No relays but MOSFET switches, and therefore no sparks

Specifications:

Maximum Continuous Load Current: 200 A
Voltage Rating: 6-35 V Operating
Peak Current: 600 A
Current Consumption: BLE On - When on - 1.4 mA When Off or Low Voltage Shutdown - 0.9 mA, BLE Off - When on - 1.2 mA When off or low voltage shutdown - 0.7 mA
Alarm Output Delay: 12 sec
Maximum Load on Alarm Output: 50 mA
Load Disconnect Delay: 90 sec
Load Reconnect Delay: 30 sec
Operating Temperature: Full Load -40 to 40 deg C
Enclosure Rating: IP67 (Potted), Connections - IP00
Power Connection (Threaded Inserts): M8
Mounting Torque: 9 Nm
Default Thresholds: Disengage - 10.5 or 21 V, Engage - 12 to 24 V
Dimensions: 2.4 in x 4.8 in x 4.8 in
Weight: 1.8 lb