Victron Energy SmartSolar RS 450/200-Tr MPPT Solar Charge Controller

The SmartSolar MPPT RS solar charge controllers are Victron's solution for systems with large series connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid connected battery systems. features include a wide 80-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernize the presentation in line with the latest suite of Victron products.

Feature Bullets

• MPPT: Ultra fast maximum power point tracking, the MPPT VE - The SmartSolar RS solar charge controller connects to a PV array of between 80 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A
• The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium and more
• Setup and monitor with VictronConnect - The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect App
• This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends
• Daisy chain additional units -The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply "daisy chained" to each other with a single RJ45 cable be
• When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device
• Remote monitoring and control - If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers
• If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free, For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520
• SmartSolar control display - The SmartSolar RS charge controller is equipped with a display on the front panel, The display reads battery volts, charge current and voltages from both array's individually including instantaneous and total figures and unit status including any possible error codes
• I/O connections - The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals

Specifications:

Type: MPPT
Series/Model: RS 450/200-Tr
Battery Voltage: 48 V
Battery Temperature Sensor: Included
Enclosure Rating: IP21
Maximum PV Open Circuit Voltage: 250 V Absolute Maximum Coldest Conditions, 245 V Start-Up and Operating Maximum
Operating Temperature: -40 to 60 deg C (Fan Assisted Cooling)
Self-Consumption: <35 mA at 12 V, <20 mA at 48 V
Humidity: 95%, Non-Condensing
Material: Steel
Maximum PV Short Circuit Current: 70 A
Nominal PV Power at 24 V: 2900 W
Charge Current Rating: 200 A
Protection: PV Reverse Polarity, Output Short Circuit, Over temperature
Absorption Charge: 57.6 V (Adjustable)
Peak Efficiency: 98%
Self-Consumption - Load Off: 15 mA
Charging Algorithm: Multi-Stage Adaptive (Adjustable)
Data Communication: VE.Direct Port, VE.Can Port & Bluetooth (6)
Color: Blue (RAL 5012)
Nominal PV Power at 48 V: 5800 W
Nominal PV Power at 36 V: 4350 W
Remote On/Off: Yes
Programmable Relay: Yes
Maximum Charge Power: 11.5 kW at 57.6 V
Programmable Voltage Range: 36-60 V
Maximum DC PV Voltage: 450 V
Start-Up Voltage: 120 V
MPPT Operating Voltage Range: 65-450 V
Number of Trackers: 4
Maximum PV Operational Input Current: 18 A per Tracker
Maximum DC Output Charging Power: 4000 W/Tracker, 11520 W Total
Maximum PV Array Size per Tracker: 7200 Wp (450 V x 20 A)
PV Isolation Fail Level: 100 kohm
Synchronized Parallel Operation: Yes, up to 25 units with VE.Can
Power Terminals PV Input (-Tr Version): 4 mm2
Battery-Connection: M8 Bolt
Bluetooth Frequency: 2402-2480 MHz
Bluetooth Power: 4 dBm
General Purpose Analogue/Digital in Port: Yes, 2x
Dimensions: 487 mm Height x 434 mm Width x 146 mm Depth
Standards: EN-IEC 62109-1, EN-IEC 62109-2
Weight: 13.7 kg