Victron Energy SmartSolar 150/70-MC4 VE.Can MPPT Solar Charge Controller
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Feature Bullets
- MPPT: Ultra fast maximum power point tracking, the MPPT VE.can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model
- The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others
- Control your charger remotely - The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App
- This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data
- Daisy chain additional units -The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply "daisy chained" to each other with a single RJ45 cable between the individual units
- When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device
- Remote monitoring and control - If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s)
- For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520
- SmartSolar control display - The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control
- The remote on/off connector can be externally controlled by a third-party device like a lithium battery, An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device
Specifications:
Type: MPPT
Series/Model: 150/70-MC4 VE.Can
Battery Voltage: 12/24/48 V Auto Select (36 V Manual)
Enclosure Rating: IP43 (Electronic Components), IP22 (Connection Area)
Maximum PV Open Circuit Voltage: 150 V Absolute Maximum Coldest Conditions, 145 V Start-Up and Operating Maximum
Operating Temperature: -30 to 60 deg C (Full Rated Output up to 40 deg C)
Self-Consumption: <35 mA at 12 V, <20 mA at 48 V
Humidity: 95%, Non-Condensing
Power Terminal: Two Pairs of MC4 Connectors
Temperature Compensation: -16 mV/-32 mV/-64 mV/deg C
Maximum PV Short Circuit Current: 50 A
Nominal PV Power at 12 V: 1000 W
Nominal PV Power at 24 V: 2000 W
Charge Current Rating: 70 A
Protection: PV Reverse Polarity, Output Short Circuit, Over temperature
Absorption Charge: 14.4/28.8/43.2/57.6 V (Adjustable with: Rotary Switch. Display. VE.Direct or Bluetooth)
Float Charge: 13.8/27.6/41.4/55.2 V (Adjustable: Rotary Switch, Display, VE.Direct or Bluetooth)
Peak Efficiency: 98%
Charging Algorithm: Multi-Stage Adaptive (Eight Pre-Programmed Algorithms) or User Defined Algorithm)
Data Communication: VE.Can
Color: Blue (RAL 5012)
Nominal PV Power at 48 V: 4000 W
Battery Terminals: 35 mm2/2 AWG
Nominal PV Power at 36 V: 3000 W
Data Stored: Battery Voltage, Current and Temperature, as well as Load Output Current, PV Voltage and PV Current
Number of Days Trends Data is Stored: 46
Charge Voltage Equalization: 16.2/32.4/48.6/64.8 V (Adjustable)
Maximum Altitude: 5000 m (Full Rated Output up to 2000 m)
Environmental Condition: Indoor, Unconditioned
Pollution Degree: PD3
Remote On/Off: Yes (2 Pole Connector)
Programmable Relay: DPST AC Rating: 240 VAC/4 A, DPST DC Rating: 4 A up to 35 VDC, 1 A up to 60 VDC
Parallel Operation: Yes, Parallel Synchronized Operation with VE.Can (Max 25 Units) or Bluetooth (Max 10 Units)
Dimensions: 215 mm Height x 250 mm Width x 95 mm Depth
Standards: EN/IEC 62109-1, UL 1741, CSA C22.2
Weight: 3 kg
Item Documents Specification Sheet
Item Documents Owners/User Manual
Item Documents Technical Drawing