Tamarack Solar Pipe Mount. Connects rail to 2-inch pipe. Pack of 8

Feature Bullets

• Securely mount the rail to the horizontal 2-inch pipe. U-bolts are included
• The tamarack ground mount system is assembled using 3.1 rail with 2-inch schedule 40 or 80 galvanized steel pipe that is purchased separately
• Use four 66 in rails and two structural splices per column to create two 132-inch rail assemblies for 3 modules per column
• Use four 85 in rails and two structural splices per column to create two 170-inch rail assemblies for for 4 modules per column
• The maximum PV module width is 41.5- inches on 4 module columns and 43 inches on 3 module columns
• The system comes with all parts needed except for the 2-inch pipe and concrete. Assembly is quick and easy and can be used on almost any terrain
• Simple design - Arrays can be in columns of 3 or 4 module high and any width required
• Easy to install - No welding or drilling and two wrench sizes fit all fasteners
• UL 2703 Listed - All components meet the UL 2703 standards for bonding and grounding
• PE Certified - Pre-stamped engineering letters available for most states
• Easy to configure - Unlimited system size with tilt angles from 0 to 45 degrees
• Visually appealing - Simple to adjust for perfect alignment, even if the surface is irregular
• Simple wire management - PV cables and wiring for module-level electronics fits inside rails to avoid time-consuming wire management
• Extremely robust - For use in locations with wind speeds up to 170 MPH and ground snow loads of up to 70 PSF

Specifications:

Size: 2 in
Includes: U-Bolts
Standards: CE, ETL, IEC, UL Listed
Weight: 5 lb