Soladeck flashed PV roof-mount combiner/enclosure 600VDC 120 amp
SolaDeck models are flashed, seamless, weather-tight enclosures that are NEMA 3R rated. They provide a flashed roof penetration that connects the outdoor system wiring to the interior house wiring and give consistency in every installation. The 0799-5B Photovoltaic Combiner Enclosure is listed and labeled to UL 1741 standards and can be used to combine or pass-through wiring of both AC and DC circuits. A professional appearance is provided by the 18-gauge galvanized 90 steel and powder-coated finish.
Feature Bullets
- A slotted cover locks into place with one pre-installed set screw, NO more loose cover screws!
- Lower profile cover allows side and bottom penetration to the sidewalls
- Installed din rail can be used horizontally or vertically depending on your install needs
- Two 3/4 in pre-punched holes at the base of the SolaDeck. Two NEMA 4 plugs come installed, these can be removed to insert your fitting or conduit without needing to drill
- Base and cover stamped from G90 galvanized steel
- 7 in Din rail and 5 position ground block factory installed
- 2/12 - 12/12 Roof slopes
- Limited lifetime warranty
- Seamless draw (stamped) with a 15.75" x 17.25" flashing
Specifications:
Type: Roof Mount
Height: 17-1/4 in
Width: 15-3/4 in
Depth: 3.13 in
Material: 18 Gauge G90 Galvanized Steel
Finish: Powder Coated Black
Enclosure Rating/IP Rating: NEMA 4
Electrical Rating: 600 Vdc at 115 A, 240 Vac at 60 A
Temperature Rating: -35 to 75 deg C
Weight: 9.2 lb
Standards: ETL listed & labeled, Conforms to the UL1741 Standard, CSA C22.2 No. 290
Item Documents Specification Sheet
Item Documents Instruction/Installation Manual
Item Documents Drawing Sheet