Sol-Ark 30000 W (3 Phase) Grid-Tie/Off Grid Battery-Based Solar Hybrid Inverter

Sol-Ark® solar hybrid inverter designed for light commercial and industrial businesses.

Feature Bullets

• Easy Install - The Sol-Ark Inverter comes with everything you need to install it. Nicely packaged for added efficiency
• Fleet Management - With Sol-Ark's remote access features and app you are never out of touch to quickly repair or adjust any system without being on site
• Battery Agnostic - Sol-Ark inverters also do not have expensive battery restrictions like other solar inverters do, and can be used with a wide variety of 48V battery chemistries, from lead to lithium
• Warranty and Reliability - Comes with our award winning iron clad warranty and our 7 day a week live Engineering Support to assist you in all your needs

Specifications:

Type: Grid-Tie/Off Grid, Battery-Based
Width: 20.8 in
Height: 35.2 in
Depth: 11.6 in
Maximum Allowed PV Power (STC): 39500 W (Input Data PV)
MPPT Voltage Range: 150-500 V (Input Data PV)
Startup Voltage: 180 V (Input Data PV)
Maximum DC Input Voltage: 550 V (Input Data PV)
Maximum Operating Input Current Per MPPT: 36 A (Input Data PV)
Maximum Short-Circuit Current Per MPPT: 55 A (Input Data (PV))
Number of MPPT Trackers: 4 (Input Data PV)
Number of PV Strings Per MPPT: 2 (Input Data PV)
Maximum AC Coupled Input: 30000 W (Input Data PV)
Battery Chemistry: Lithium Iron Phosphate (LFP) (Battery Input Data DC)
Number of Battery Inputs: 2
Battery Input Terminal Rating: 50 A
Nominal DC Voltage: >/=300 V (Battery Input Data DC)
Operating Voltage: 160-500 V (Battery Input Data DC)
Capacity: 50-9900 Ah (Battery Input Data DC)
Maximum Battery Charge/Discharge Current: 100 A (50 A Per Input) (Battery Input Data DC)
Charging Controller: 3-Stage with Equalization (Battery Input Data DC)
Grid to Battery Charging Efficiency: 96% (Battery Input Data DC)
Automatic Generator Start (AGS): 2 Wire Start - Integrated (Battery Input Data DC)
BMS Communication: CANBus & RS485 (Battery Input Data DC)
Nominal AC Voltage: 120/208 V (3 Phase) (Output Data AC)
Grid Frequency: 50/60 Hz (Output Data AC)
Real Power, Maximum Continuous: 30000 W (3 Phase) (Output Data AC)
Maximum Output Current: 83.4 A (Output Data AC)
Peak Apparent Power (10 s, Off-Grid): 45000 VA (3 Phase) (Output Data AC)
Maximum Output Fault Current (100 ms):
Maximum Grid Passthrough Current: 200 A (10 Min) (Output Data AC)
Power Factor Output Range: +/-0.8 Adjustable (Output Data AC)
Backup Transfer Time: 5 ms (Output Data AC)
CEC Efficiency: 96.5% (Output Data AC)
Maximum Efficiency: 97.5% (Output Data AC)
Design (DC to AC): Transformerless DC (Output Data AC)
Stackable: Up to 10 in Parallel (Output Data AC)
PV DC Disconnect Switch-NEC 240.15: Integrated
Ground Fault Detection-NEC 690.5: Integrated
PV Rapid Shutdown Control-NEC 690.12: Integrated
PV Arc Fault Detection-NEC 690.11: Integrated
PV Input Lightning Protection: Integrated
PV String Input Reverse Polarity Protection: Integrated
Surge Protection: DC Type II/AC Type II
Enclosure Rating: IP65/NEMA 3R
Ambient Temperature Rating: -40 to 60 deg C, >45 deg C Derating
Noise Rating: <30 dB at 25 deg C
Idle Consumption-No-Load: 60 W
Communication and Monitoring: Wi-Fi & LAN Hardware Included
Standards: UL 1741-2021 (UL1741SB), CSA C22.2 No 107.1-16, IEEE 1547-2018 & 1547a-2020 & 1547.1-2020 (SRD V2.0), UL 1741 CRD-PCS, UL1699B, CEC, SGIP Pending Listing, TUV, ETL, PV Cycle, MES, IEC
Warranty: 10 Years
Weight: 176 lb
Application: Commercial & Industrial