OutBack Power FLEXmax™ 80 A MPPT Solar Charge Controller

The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104 deg F (40 deg C). Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration. FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.

Feature Bullets

• Maximum power point tracking (MPPT)
• Active cooling and intelligent thermal management cooling
• Full power output in ambient temperatures as high as 104 deg F (40 deg C)
• Built-in, backlit 80 character display
• Integrated OutBack network communications
• Increases PV array output by up to 30%
• Advanced continuous maximum power point tracking
• Battery voltages from 12 to 60 VDC
• Programmable auxiliary control output
• Built-in 128 days of data logging

Specifications:

Type: MPPT
Nominal Battery Voltage: 12, 24, 36, 48, 60 VDC (Single Model, Selectable Via Field Programming at Start-Up)
Power Consumption: <1 W Typical Standby
Enclosure Rating: Indoor Type 1
Operating Temperature: -40 to 60 deg C
Conduit Knockouts: One 1 in (25.4 mm) on the Back, One 1 in (25.4 mm) on The Left Side, Two 1 in (25.4 mm) on the Bottom
Type of Charging/Charging Regulation: Bulk, Absorption, Float, Silent and Equalization
Maximum Output Current: 80 A
PV Open-Circuit Voltage (VOC): 150 VDC Absolute Maximum Coldest Conditions/145 VDC Start-Up and Operating Maximum
Power Conversion Efficiency: 97.5% at 80 ADC in a 48 VDC System (Typical)
Network Cables: Proprietary Network System Using RJ-45 Modular Connectors with CAT5 Cable (8 Wires)
Peak Efficiency: 60 VDC Input with 48 V Battery at 53.1 VDC (98.44%)
NEC Recommended Solar Maximum Array STC Nameplate: 12 VDC Systems: 1000 W, 24 VDC Systems: 2000 W, 48 VDC Systems: 4000 W, 60 VDC Systems: 5000 W
CEC Weighted Efficiency: 97.3% (at 48 VDC)
Voltage Regulation Set Points: 13 to 80 VDC user Adjustable with Password Protection
Equalization Charging: Programmable Voltage Setpoint and Duration, Automatic Termination when Completed
Battery Temperature Compensation: Automatic with optional RTS Installed/5.0 mV per deg C per 2 V Battery Cell
Voltage Step-Down Capability: Down Convert from any Acceptable Array Voltage to any Battery Voltage. Example: 72 VDC Array to 24 VDC Battery, 60 VDC Array to 48 VDC Battery
Programmable Auxiliary Control Output: 12 VDC Output Signal which can be Programmed for Different Control Applications (maximum of 0.2 ADC)
Status Display: 3.1 in (8 cm) Backlit LCD Screen, 4 Lines with 80 Alphanumeric Characters Total
Remote Display & Controller: Optional MATE3s, MATE or MATE2
Data Logging: Last 128 days of Operation - Amp-Hours, Watt-Hours, Time in Float, Peak Watts, Amps, Solar Array Voltage, Maximum Battery Voltage, Minimum Battery Voltage and Absorb Time, Accumulated Amp-Hours and kWh of Production
Options: Remote Temperature Sensor (RTS), HUB4, HUB10.3, MATE, MATE2, MATE3s
Dimensions: 16.25 in x 5.75 in x 4.5 in
Standards: ETL Listed to UL1741, CSA C22.2 No. 107.1
Weight: 12.2 lb/kg
Warranty: Standard 5 Years, Extended 10 Years